Parker Hannifin  
home   | products   | how to buy   | support & downloads   | literature   | search

Electromechanical Automation (Motion Control Systems), North America:  Home > Products > Planetary Gearheads > Gearmotor (GM)


Gearmotor (GM)

Parker Bayside''s Stealth® Gearmotors represents the first time a brushless servo motor and a helical planetary gearhead have been integrated into a single product. Previously, engineers needing a gear drive with servo motor were forced to purchase the gearhead and motor separately. Parker Bayside manufactures precision gearheads and brushless motors under one roof. This provides us with the unique ability to design and supply a precision integrated gearmotors.

Stealth® Gearmotors combine both mechanical and electronic parts into a compact, powerful package. The motor magnets are attached directly to the input gearshaft, eliminating the extra couplings, shafts and bearings required when the two components are separate. Eliminating these extra parts means that Stealth Gearmotors are more reliable, have higher performance and cost less than traditional motor/gearhead assemblies.

Features & Benefits:

  • Large Output Bearings for high radial loads
  • IP65 Protection with Viton se

    Other Products in This Category:

    Rotary Servo Motors ~ Parker Bayside
      Backlash (arc minutes) Config. Cont Torque Tc (Nm) Feedback Frame Size Gear Teeth IP Rating Noise (db) Ratios Windings (Vdc)
    Gearmotor (GM) < 10 In-Line 3 to 60 Encoder
    Resolver
    60 to 115 mm
    NEMA 23 to 42
    Helical
    Planetary
    IP 65 <68 5, 7, 10
    (3 ratios)
    160 Vdc
    360 Vdc
    Stainless Steel Gearmotor (GM) < 10 Brushless Motor In-Line Gearhead 7 to 23 Encoder
    Resolver
    90, 115 mm
    (115, 142) mm
    Helical
    Planetary
    IP67 <68 5, 7, 10, 15, 20, 25, 30, 40, 100 160 (115)
    360 (230)
    600 (460)
    Servo Wheel Series   brushless dc motor with planetary gears   Encoder 6 Inch Wheel Diameter Straight Tooth Planetary IP54      
    Stealth Gearhead "Advanced In-Line" PS < 3 In-Line 5 to 4,181   40 to 300 mm
    (8 sizes)
    Helical Planetary IP 65 <68 3 to 100
    (12 ratios)
     
    Stealth Gearhead "In-Line" PX < 8 In-Line 18 to 158   60 to 115 mm
    NEMA 23 to 42
    (3 sizes)
    Helical Planetary IP 65 <70 3 to 100
    (11 ratios)
     
    Stealth Gearhead "Advanced Right Angle" RS < 4 Right Angle 11 to 4,181   60 to 300 mm
    (7 sizes)
    Helical Planetary / Spiral Bevel IP 65 <72 5 to 100
    (9 ratios)
     
    Stealth Gearhead "Right Angle" RX < 14 Right Angle 7 to 45   60 to 115 mm
    NEMA 23 to 42
    (3 sizes)
    Helical Planetary IP 65 <70 5 to 100
    (9 ratios)
     
    Stealth Gearhead "Right Angle" MultiDrive < 4 RT - Right Angle Thru Bore, RD - Right Angle Double Shaft, RB - Right Angle 34 to 565   90 to 220 mm
    (5 sizes)
    RT - Spiral Bevel / Helical, RD and RB - Spiral Bevel IP 65   RT - 3 to 30 (5 ratios), RD - 1 to 30 (7 ratios), RB - 1 to 3 (3 ratios)  
    Stealth Gearhead "Inline (NE) and Right Angle (NR)" NEMA NE - < 10
    NR - < 15
    NE - In-Line
    NR - Right Angle
    50 to 350   NE - NEMA 23 to 42(3 sizes)
    NR - NEMA 23 to 42 (3 sizes)
    NE - Spur
    NR - Bevel / Spur
    IP54   NE - 3 to 100(9 ratios)
    NR - 1 to 100(10 ratios)
     
    PV Series "In-Line Power and Versatility" < 18 In-line 3.5 to 70   40,60,90,115 mm NEMA17,23,34,42 Straight Tooth Planetary IP64 <65 3, 4, 5, 7, 10, 12, 15, 16, 20, 25, 30, 35, 40, 50, 70, 100  

    Planetary Gearheads ~ Parker Bayside
      Backlash (arc minutes) Config. Cont Torque Tc (Nm) Feedback Frame Size Gear Teeth IP Rating Noise (db) Ratios Windings (Vdc)
    Gearmotor (GM) < 10 In-Line 3 to 60 Encoder
    Resolver
    60 to 115 mm
    NEMA 23 to 42
    Helical
    Planetary
    IP 65 <68 5, 7, 10
    (3 ratios)
    160 Vdc
    360 Vdc
    Stainless Steel Gearmotor (GM) < 10 Brushless Motor In-Line Gearhead 7 to 23 Encoder
    Resolver
    90, 115 mm
    (115, 142) mm
    Helical
    Planetary
    IP67 <68 5, 7, 10, 15, 20, 25, 30, 40, 100 160 (115)
    360 (230)
    600 (460)
    Servo Wheel Series   brushless dc motor with planetary gears   Encoder 6 Inch Wheel Diameter Straight Tooth Planetary IP54      
    Stealth Gearhead "Advanced In-Line" PS < 3 In-Line 5 to 4,181   40 to 300 mm
    (8 sizes)
    Helical Planetary IP 65 <68 3 to 100
    (12 ratios)
     
    Stealth Gearhead "In-Line" PX < 8 In-Line 18 to 158   60 to 115 mm
    NEMA 23 to 42
    (3 sizes)
    Helical Planetary IP 65 <70 3 to 100
    (11 ratios)
     
    Stealth Gearhead "Advanced Right Angle" RS < 4 Right Angle 11 to 4,181   60 to 300 mm
    (7 sizes)
    Helical Planetary / Spiral Bevel IP 65 <72 5 to 100
    (9 ratios)
     
    Stealth Gearhead "Right Angle" RX < 14 Right Angle 7 to 45   60 to 115 mm
    NEMA 23 to 42
    (3 sizes)
    Helical Planetary IP 65 <70 5 to 100
    (9 ratios)
     
    Stealth Gearhead "Right Angle" MultiDrive < 4 RT - Right Angle Thru Bore, RD - Right Angle Double Shaft, RB - Right Angle 34 to 565   90 to 220 mm
    (5 sizes)
    RT - Spiral Bevel / Helical, RD and RB - Spiral Bevel IP 65   RT - 3 to 30 (5 ratios), RD - 1 to 30 (7 ratios), RB - 1 to 3 (3 ratios)  
    Stealth Gearhead "Inline (NE) and Right Angle (NR)" NEMA NE - < 10
    NR - < 15
    NE - In-Line
    NR - Right Angle
    50 to 350   NE - NEMA 23 to 42(3 sizes)
    NR - NEMA 23 to 42 (3 sizes)
    NE - Spur
    NR - Bevel / Spur
    IP54   NE - 3 to 100(9 ratios)
    NR - 1 to 100(10 ratios)
     
    PV Series "In-Line Power and Versatility" < 18 In-line 3.5 to 70   40,60,90,115 mm NEMA17,23,34,42 Straight Tooth Planetary IP64 <65 3, 4, 5, 7, 10, 12, 15, 16, 20, 25, 30, 35, 40, 50, 70, 100  


User Guides
 
  • Additional Details
    Support
     
  • Distributor and Factory Support
    Contact Us
     
  • Human-Machine Interface and Integrated Machine Control
      CTC
      TEL: (513) 831 2340 or (800) 233 3329
      FAX: (513) 831 5042
     
  • Rotary Servo Motors
     
  • Servo and Stepper Motion Control Systems
      Acroloop / Compumotor / Custom Servo Motors
      TEL: (707) 584 7558 or (800) 358 9070
      FAX: (707) 584 2446
     
  • Linear Servo Motors
      Trilogy Systems
      TEL: (281) 226-7750
     
  • Electromechanical Positioning Systems
      Daedal
      TEL: (724) 861 8200 or (800) 245 6903
      FAX: (724) 861 3330
     
  • Gearheads, Gearmotors
    Frameless Motors
    Precision Motion Systems
      Bayside
      
      FAX: 516-629-8000
     
  • Electromechanical Actuator Products
      Actuator Division
      TEL: (330) 336 3511
      FAX: (330) 336 3335
      EMN_sales@parker.com
      EMN_support@parker.com

    Privacy Policy
     
    © Copyright Parker Hannifin Corporation 2003-2006
    ˛Z